PDA

View Full Version : Dual 5800 and SV-XPNDR-261 serial ports



akmodels
12-07-2014, 09:31 AM
AF install manual for XPNDR-261 mentions connection to only one serial port on PFD, however in "SkyView" manual XPNDR-261 >>MUST<< be wire in parallel to both screens to same numerical port on each screen, effectively using 2 ports.
Am I correct to assume I need to connect ONLY to one port on PFD for the AF set-up? Also, my system does have network hub etc.

Rob Hickman
12-08-2014, 10:34 AM
You can wire it to any of the AF-5000 serial ports and should only wire it to the pilot PFD screen.