Activity Stream

Could there be a feature enhancement to allow the Stratux data to be received in AP mode? That way we don't have to choose between uploading flight...

Just to let you know I just did an upgrade from 4500s and had the exact same problem. Luckily, I found this thread, but could I suggest a few changes...

While that software is ancient, this is not a software problem. It may be heat related, but given the precedent with Seareys it is probably more...

With a functioning backup battery the clock will persist from boot cycle to boot cycle. If only the hour hand is off but the minutes are accurate...

1) Both screens stay on for the full 30 seconds after master is shutdown. So the backup batt seems to be ok. 2) The ILS message was a text...

Do you get the thirty second countdown when you shut off the master at the end of the flight and do the EFIS displays stay alive for the full thirty...

Thanks for this, Jonathon. I'll update the touch screens' software, and yes, I'm planning on relocating the ADSB to one of the touchscreens. You've...

Temps weren't a factor, the last data point we got from your non-touch before it crashed included a core temp report of only 64.0C, which we don't...

Thank you Jonathon for the reply. The one I have is a Gretz

The length is not critical. As long as the mast shares the common AN-5812 profile, third party masts such as the popular Gretz mast will work fine.

Airmate map support has been implemented in our internal development software, and will be in the next public software release for AF-5/6000.

I was hoping for bias! I want to hear what folks like and dislike. I left notes in VansAirforce and the Dynon forums and responses been pretty...

I suspect that everyone reading this forum may be a tad bit biased. �� Did you see the video that Rob posted on Facebook this week? That may...

I recently added AirMate data to my Dynon Skyview HDX system and it works just fine. Does AFS support AirMate data?

if you make that altitude alert file could you share it? Alan

1.) Make a backup of all your sound files from the calibration menu --> admin settings --> transfer files screen. 2.) make your ding file, save as...