Activity Stream

When you select a runway on the Avidyne the selected runway is not sent in the ARINC data to the EFIS so we have no way of drawing it. If you select...

Bob has great information here I'll try to fill in some other bits. I did find your email in the spam section of the support@ account. The email...

I didn’t catch that you were down under...... 1. Probably, you’ll want to talk to AFS about that. While I’ve been walked through several other...

Thanks for the response Bob much appreciated, that's kinda what I'm thinking but also looking to reuse as much as possible to minimise cost as much...

I've also found that if you are looking for information that may take the recipient significant time to respond via email, just call them directly. ...

I vote yes please. With the flight plan in the Avidyne and not on the AFS internal flight plan, its an extra step having to go into the AFS flight...

The beeping AOA has been moved to V17 slate due to complexity issues. Reducing your Landing Warning Override should fix your issue. If you are...

Any update on this? I've got Audio On for my AOA, but I've never heard *anything* -- not a voice, not a series of beeps. I miss the kazoo-like stall...

The AF-3/4000s can use Jeppesen or PocketFMS for international map data availability. There is currently no international data providers...

I am using PFMS since 2011. Based in Europe and using PFMS on my Ipad then, it was the obvious choice. However, things have changed. The PC program...

Lynx L3 NGT-9000 can be connected to any AF-5000, or AF-3/4000s serial port using the configuration "ADSB 115K" when configured for GDL-90 protocol...

This is currently a requested feature, see http://advanced-flight-systems.com/forum/threads/1558-EarthX-Battery-Monitor It's a rather complicated...

Have you verified your ADS-B out by requesting a PAPR? https://adsbperformance.faa.gov/paprrequest.aspx

Ensure you have the SV-NETWORK properly functional by performing a SCAN on the PFD. Then you should have access to SET -> AHRS -> Hold MAG CAL....

Go with the AOA pitot tube. Its much easier and the tubes are far less prone to issues. Wing ports will be less likely supported in future designs. ...

Your MFD was probably not purchased with a mapping key. Use CHECK -> MAINT -> (ABOUT) to see if your KEYS: has MAPPING. If it does you need an SD...

Any update on seeing own ship as traffic? I’m getting that constantly and it’s super distracting. I also get some traffic, weather including radar...

Resolved by providing good Serial connection ground. It works great.

Mine only did the PFD as well. How can I reaccomplish or complete for the MFD and second PFD? I'm getting the caution message but no "touch to...

When building, what are the pros/cons of the Dynon pitot AOA vs the old style wing pressure ports? Planning an AFS panel and I want to make the...